General-purpose silicone sealant
About this product
HYJ GENERAL PURPOSE SILICONE SEALANT is a cost effective, general purpose acetoxy cure silicone sealant which offers long term durability in a range of general sealing and general glazing applications. It can be used to glaze, seal and fill joints on windows, signs, internal fixtures and fitting like doors and so on.
How to use
Apply to clean, dry and grease-free surfaces. Cut the nozzle at 45°angle to the desired shape and size. For better appearance, cover outside of joint areas with masking tape before application. Tool immediately after sealant application and remove masking tape before sealant skins.
FEATURES
- Easy to use – one part, no mixing required. Can be dispensed with an ordinary caulking gun.
- Cures to a strong, flexible seal capable of withstanding movement in and around the joint.
- No seasonal limited in application.
- Outstanding weatherproofing ability, resisting to ultraviolet ray, ozone, snow, or temperature extremes.
- Non-slumping; can be used in vertical and overhead joints.
Storage
Available in:
- Standard Size:
270ml recyclable plastic cartridge, 24ctgs/ctn - Special Size:
Contact us for special size.
Specifications
| Test Parameter | Unit | Result |
| As Supplied Tested at 23ºC and 50% RH | ||
| Specific Gravity | g/ml | 0.94±0.02 |
| Flow (sag or slump) | mm | 0 |
| Extrusion Rate | ml/minute | 130 |
| Skin Time | minute | 5~10 |
| Tack-free Time | hour | ≤1.0 |
| Curing time (5mm) | hour | ≤18 |
| As Cured-after 21 days at 23ºC and 50% RH | ||
| Durometer Hardness, Shore A | Points | 18 |
| Movement Capability | % | ±20 |
| Tensile/Modulus at 50% Elongation | Mpa | 0.28 |
| Tensile/Modulus at 100% Elongation | Mpa | 0.3 |
| Ultimate Tensile Strength Ultimate Elongation at Break |
Mpa % |
0.4 375 |
Applications
sealing washroom tools, sink, toilet, so on
sealing window & door frame
sealing wall gaps